HP 3PAR T-Class Installation and Deinstallation Guide

Figure 1 Storage System and Service Processor on the Customer Network (Shared Topology)
A shared topology requires:
• A static IP address and system name for the storage system.
• Two Ethernet connections from a switch or hub to the storage system controller nodes.
• A static IP address for the service processor.
• One Ethernet connection from a switch or hub to the service processor.
• At least one management station on the network segment.
Private
With a private network topology, the storage system and the service processor sit on the same
private network segment on the customer local area network. All management workstations used
to administer the system must also sit on the same private network segment (Figure 2 (page 11)).
Figure 2 Storage System and Service Processor on a Private Segment (Private Topology)
A private topology requires:
• A static IP address for the storage system.
• Two Ethernet connections from the storage system to a private network segment.
• One Ethernet connection from the service processor to the private network segment.
• A static IP address for the service processor.
• At least one management station on the private network segment.
Planning Network Access 11