HP 3PAR T-Class Installation and Deinstallation Guide

Enter the following information:
DescriptionField
A unique and static identifier for this SP.
NOTE: Enter the Service Processor ID only when you set up this
SP for the first time.
Service Processor ID
The host name that you want to apply to this SP.Service Processor hostname
The IPv4 address you want to assign to this SP.IP Address
Optional. If you do not want to accept the default subnet mask,
enter a custom setting.
Subnet Mask
Optional. If you do not want to accept the default subnet mask,
enter a custom setting.
Gateway
3. To confirm the SP ID, click Next. The Configure Remote Support page displays.
Setting up the Service Processor 101