3PAR Service Processor User's Guide (320-200247 Rev B, April 2011)

3.12
Managing NTP Configuration
3PAR Service Processor User’s Guide
3.13.1 Displaying the NTP Configuration
To display the current Service Processor (SP) NTP configuration:
1 From the NTPCONF submenu, type 1 for Display NTP Configuration and press
ENTER.
2 Press
ENTER to return to the NTPCONF submenu.
3.13.2 Adding an External NTP Server
To add an external NTP server to the Service Processor NTP configuration settings:
1 From the NTPCONF submenu, type 2 for Add external NTP server and press
ENTER.
2 When the NEWNTP menu appears, type the IP address for the NTP server and press
ENTER.
3 When prompted, confirm the addition of the new NTP server.
3.13.3 Removing an External NTP Server
To remove an existing external NTP server from the Service Processor NTP configuration
settings:
1 From the NTPCONF submenu, type 3 for Remove external NTP server and press
ENTER.
2 Type the number corresponding to the external NTP server set to be deleted from the SP
configuration settings and press
ENTER.
3 When prompted, type y and press
ENTER confirm the NTP server configuration removal.
NOTE: The output displays the content of the NTP configuration ntp.conf file
that shows the running parameters for the active NTP instance on the SP.