HP 3PAR System Reporter 3.1.0 Software User's Guide (QL226-96645, December 2012)

Table 57 Metric (continued)
Data TablesDescriptionMetrics
statpd_fc10sum, statpd_fc15sum,
statpd_ssd150sum, statld, statvlun
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15,
Write KBytes/secwrite_kbps
statpd_ssd150, statpd_sum,
statpd_nl7sum,statpd_fc10sum,
statpd_fc15sum,statpd_ssd150sum, statld, statvlun
statport, statport_nodesum, statport_syssum,
statpd, statpd_nl7, statpd_fc10, statpd_fc15,
Total (read + write) KBytes/sectotal_kbps
statpd_ssd150, statpd_sum, statpd_nl7sum,
statpd_fc10sum, statpd_fc15sum,
statpd_ssd150sum, statld, statvlun
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun
Read service time in millisec averaged
over the sample
read_svctms
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun
Write service time in millisecwrite_svctms
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun
Total (read + write) service time in millisectotal_svctms
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun
Read IO Size in KBytesread_ioszkb
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun
Write IO Size in KByteswrite_ioszkb
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun
Total (read + write) IO Size in KBytestotal_ioszkb
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun
Total queue lengthtotal_qlen
statcpuPercentage idle time for the nodeidle_perc
statport, statpd, statpd_nl7,statpd_fc10,
statpd_fc15, statpd_ssd150, statld, statvlun
Total utilization per second. For instance,
when the PD utilization exceeds a given
total_utilperc
high (say 90%) utilization meaning that
90% of the time there is some IO
operation outstanding at the PD.
Direction
Specifies whether the Metric should be less than (<) or greater than (>) the Limit Value for the alert
to be generated.
Limit Value
Specifies the value that the Metric is compared to. This should be a number.
Limit Count
The alert will only be generated if the number of objects for which the Metric exceeds the Limit
Value (in the direction specified by Direction) is greater than Limit Count in any given sample. This
should be an integer.
Condition
Specifies the condition (min_read_iops, min_write_iops, min_total_iops) that should be monitored.
Configuring Rules for Email Alerts 121