HP 3PAR Storage Replication Adapter 5.1.0 Troubleshooting Guide

Table 14 prepareReverseReplication Troubleshooting Checklist (continued)
Troubleshooting TipsExample of Key Log MessageProblem DescriptionProblem Area
storage array for more
information.
This error indicates that
storage array returns
[2010-05-27 10:58:47.031 'TPDSrm.
checkTestFailoverStart.Run' 3PAR_1018 error
Missing expected
output content from
storage.
Get Virtual
Volume
information on empty output for the(id=5432)] Error. Unable to get detail virtual
the HP 3PAR
Storage system
command issued. This can
be caused by intermittent
network interruption.
volume information. Additional information:
<xxxx>
This error indicates that
the requested group for
[2010-05-27 16:33:37.734 'TPDSrm.
testFailoverStart.Run' 3PAR_1022 error
Invalid Remote Copy
group.
Check Remote
Copy group
status. checking is not available(id=1580)] Error. The specified group
in the storage array.<MmmtGroup1.r26> does not exist in the
storage array. Contact your storage
administrator and validate
the finding.
This error indicates that
Remote Copy link is down
[2010-05-28 16:44:10.875
'TPDSrm.prepareReverseReplication.Run'
Remote Copy link is not
up.
Check Remote
Copy link status.
between the local storage
array and the peer array.
3PAR_1063 error (id=1324)] Error. All
available Remote Copy links are down for
<srm_cancun.r418>.
prepareReverseReplication 47