HP 3PAR Storage Replication Adapter 5.1.0 Troubleshooting Guide
Table Of Contents
- HP 3PAR Storage Replication Adapter 5.1 for VMware vCenter Site Recovery Manager
- Contents
- 1 Introduction
- 2 Workflows and Corresponding Log Messages
- queryInfo
- queryString
- queryErrorDefinitions
- queryCapabilities
- queryConnectionParameters
- discoverArrays
- discoverDevices
- checkTestFailoverStart
- testFailoverStart
- testFailoverStop
- checkFailover
- prepareFailover
- failover
- prepareReverseReplication
- reverseReplication
- prepareRestoreReplication
- restoreReplication
- syncOnce
- querySyncStatus
- queryReplicationSettings
- 3 Tear-Down Workflows
- CheckInFormVersion
- CheckInServConnectivity
- CheckInServLicense
- CheckRCLinkStatus
- CreateRCGroupSnapshotForBackup
- CreateGroupSnapshotForTest
- ExposeVvToSingleHost
- FailoverRCGroup
- FillTestSnapshotInfo
- GetDetailRCInformation
- GetInFormVersion
- GetInServHostPortInformation
- GetInServPortInformation
- GetInServTime
- GetInServVVInformation
- GetNextAvailableLunNo
- GetRCGroupLastSyncTime
- GetRCGroupStatus
- GetRCTargetSysInfo
- GetRecoveryInformationById
- GetRecoveryInformationbyVvName
- GetTaskStatus
- GetTaskStatusByType
- GetVvAssocVLunInfo
- GetVVInfoByVVID
- PromoteDataToRecoveryPoint
- PromoteSnapshotToParent
- RecoverRemoteCopyGroup
- RemoveGroupSnapshots
- StartRemoteCopyGroup
- StopRemoteCopyGroup
- SyncRemoteCopy
- UndoRemoteCopyGroupRole
- UnExposeVVFromAllHost
- UnExposeVVFromHost
- WaitingForPromoteCompletion
- 4 Error Messages

Table 21 Message Table (continued)
Fix HintMessage DescriptionName
If the error is related to network issues, check if you
have problem with your network connection.
•
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
Complete: Failed to Failover with Remote
Copy group <GroupName> with target
<tgtname>.
3PAR_3114
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
None.Commence: Start to retrieve all Remote
Copy group information.
3PAR_3115
None.Complete: Have retrieved all Remote
Copy group information successfully.
3PAR_3116
Complete: Failed to retrieve all Remote
Copy group information.
3PAR_3117
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
None.Commence: Try to start Remote Copy
group <RCgroup> to identify the stage.
3PAR_3118
None.Complete: Failed to start Remote Copy
group <RCgroup>, it is a at post-failover,
3PAR_3119
pre-recover stage, need to do recover
first.
None.Completed: Remote Copy group
<RCgroup> has been started, its is at
post-recover stage.
3PAR_3120
None.Commence: Start to recover Remote
Copy group <RCgroup>.
3PAR_3121
None.Complete: Have recovered Remote Copy
group <RCgroup> successfully.
3PAR_3122
Complete: Failed to recover Remote
Copy group <RCgroup>.
3PAR_3123
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
None.Info. Remote Copy group last sync time
was <lastSyncTime>.
3PAR_3124
134 Error Messages