HP 3PAR Storage Replication Adapter 5.1.0 Troubleshooting Guide

Table 21 Message Table (continued)
Fix HintMessage DescriptionName
Complete: Failed to promote Remote
Copy group <RCgroup>.
3PAR_3107
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
Complete: Failed to issue start command
to Remote Copy group <GroupName>
with target <tgtname>.
3PAR_3108
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
Complete: Failed to issue sync command
to Remote Copy group <GroupName>
to target <tgtname>.
3PAR_3109
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
Complete: Failed to issue recover
command to Remote Copy group
<GroupName> with target <tgtname>.
3PAR_3110
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
Complete: Failed to issue reverse
command to Remote Copy group
<GroupName> with target <tgtname>.
3PAR_3111
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
Complete: Failed to issue restore
command to Remote Copy group
<GroupName> with target <tgtname>.
3PAR_3112
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
Complete: Failed to issue failover
command to Remote Copy group
<GroupName> with target <tgtname>.
3PAR_3113
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
133