HP 3PAR Storage Replication Adapter 5.1.0 Troubleshooting Guide

Table 21 Message Table (continued)
Fix HintMessage DescriptionName
Complete : Failed to recover Remote
Copy group <GroupName> with target
<tgtname>.
3PAR_3102
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
Complete: Failed to issue stop command
to Remote Copy group <GroupName>.
3PAR_3103
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
Complete: Failed to stop Remote Copy
group <RCgroup>.
3PAR_3104
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
None.Commence: Wait for Remote Copy
group <RCgroup>.
3PAR_3105
None.Complete: Remote Copy group
<RCgroup> has been promoted.
3PAR_3106
132 Error Messages