HP 3PAR Storage Replication Adapter 5.1.0 Troubleshooting Guide

Table 21 Message Table (continued)
Fix HintMessage DescriptionName
None.Info. Start to cleanup any backup
snapshot created from previous
prepareFailover operation.
3PAR_3047
None.Info. Undo group changes is in progress
for Remote Copy group <GroupName>.
Check again in 5 seconds.
3PAR_3048
None.Info. Reverse replication is in progress
for Remote Copy group <GroupName>.
Check again in 5 seconds.
3PAR_3049
None.Info. {InServMsg}. Retry later.3PAR_3050
None.Info. Connected to Storage System with
array id <InServSysID>.
3PAR_3051
None.Info. Successfully validate required
<License> license on Storage System.
3PAR_3052
None.Info. Current Storage System OS version
is <Version>.
3PAR_3053
None.Info. Found requested peer array Id
<PeerArrayID> in Remote Copy setup
with target name <TargetName>.
3PAR_3054
None.Commence: Create Remote copy
snaphots for <testOrBackup>.
3PAR_3055
None.Complete: Create Remote copy snaphots
for <testOrBackup>.
3PAR_3056
None.Commence: Start to expose VLUN
<LunID> of Virtual Volume <VVName>
to host <host>.
3PAR_3057
None.Complete: Has exposed VLUN <LunID>
of Virtualvolume <VVName> to host
<host>.
3PAR_3058
Complete: Failed to expose VLUN
<LunID> of Virtualvolume <VVName> to
host <Host>.
3PAR_3059
• If the error is caused by insufficient privilege to
issue the command, contact your storage
administrator for assistance.
• If the error is related to network issues, check if you
have problem with your network connection.
• If you have firewall or anti-virus software installed
on the system, make sure it allows network access
to the HP 3PAR Storage system.
None.Commence: Start to remove VLUN
<LunID> of Virtualvolume <VVName>.
3PAR_3060
None.Complete: VLUN <LunID> of
Virtualvolume <VVName> has been
removed.
3PAR_3061
128 Error Messages