HP 3PAR Storage Replication Adapter 5.1.0 Troubleshooting Guide

Table 21 Message Table (continued)
Fix HintMessage DescriptionName
None.Info. Remote Copy target <TargetName>
mirroring configuration has been
reestablished.
3PAR_3004
None.Info. Volume promotion has completed
after the Remote Copy group
<GroupName> is stopped.
3PAR_3005
None.Info. Failover is in progress for Remote
Copy group <GroupName>. Check
again in 5 seconds.
3PAR_3006
None.Info. Failover has completed with Remote
Copy group <GroupName>.
3PAR_3007
None.Info. Restore process has been initiated
for Remote Copy group <GroupName>.
3PAR_3008
None.Info. Remote Copy group <GroupName>
has been restored successfully.
3PAR_3009
None.Info. Restoring Remote Copy group
<GroupName> is in progress. Check
again in 60 seconds.
3PAR_3010
None.Info. The replication direction on Remote
Copy group <GroupName> has been
successfully reversed.
3PAR_3011
None.Info. Remote Copy group <GroupName>
already has Primary role.
3PAR_3012
None.Info. Remote Copy group <GroupName>
has an on-going promote operation.
Check again in 60 seconds.
3PAR_3013
None.Info. No associated VLUN information
is found for LUN ID <LunID>.
3PAR_3014
None.Info. VV is already exposed to the
specified host. Additional information:
<ExposeInfo>
3PAR_3015
None.Info. Virtual volume <VVName> is
already exposed to the specified initiator
group.
3PAR_3016
None.Info. LUN ID <LunID> will be used.3PAR_3017
None.Info. Snapshot LUN <VVName> is
already exposed.
3PAR_3018
None.Info. Snapshot <VVName> has been
removed successfully.
3PAR_3019
None.Info. No VLUNs listed in this HP 3PAR
Storage system.
3PAR_3020
None.Info. Remote Copy group <GroupName>
is started successfully.
3PAR_3021
None.Info. Remote Copy group <GroupName>
has initiated the data synchronization.
3PAR_3022
None.Info. Remote Copy group <GroupName>
has been stopped successfully.
3PAR_3023
126 Error Messages