3PAR Replication Adapter 4.x for VMware vCenter Site Recovery Manager Implementation Guide

9. After exporting the VLUNs to the ESX Host, rescan the HBA to verify if the VLUN is now visible
to the ESX Host.
10. Create a VMFS-3 Volume.
NOTE: For the HP 3PAR Replication Adapter to successfully discover replicated LUNs for
the VMware vCenter Site Recovery Manager, the LUN must contain a VMFS-3 file system.
This can be done from VI client via the Configuration→Storage→Add Storage mechanism.
11. Deploy a VM.
Configure Remote Copy with IP between protected site and recovery site
The HP 3PAR Remote Copy provides the capability to copy virtual volumes from the protected site
storage system to the recovery site storage system.
Please ensure that the storage system hardware is setup appropriately for creating a Remote Copy
configuration between protected site and recovery site.
Initial setup for Remote Copy from the protected site
1. From the protected site (s230 in the following examples) set up the Gigabit Ethernet link.
controlport rcip addr 10.100.33.230 255.255.255.0 0:6:1
controlport rcip addr 10.101.33.230 255.255.255.0 1:6:1
controlport rcip gw 10.100.33.1 0:6:1 (if network allows)
controlport rcip gw 10.101.33.1 1:6:1 (if network allows)
controlport rcip mtu 1500 0:6:1 (if required, default is auto)
controlport rcip mtu 1500 1:6:1 (if required, default is auto)
2. Verify connectivity (s230).
root@snodec161:S230# showport -rcip
N:S:P State ---HwAddr--- IPAddr Netmask Gateway MTU Rate Duplex AutoNeg
0:6:1 ready 0002AC530160 10.100.33.230 255.255.255.0 10.100.33.1 1500 1Gbps Full Yes
1:6:1 ready 0002AC530243 10.101.33.230 255.255.255.0 10.101.33.1 1500 1Gbps Full Yes
3. Set up Remote Copy targets and links (s230).
startrcopy
creatercopytarget s159 IP 0:6:1:10.100.33.159 1:6:1:10.101.33.159
root@snodec161:S230# showrcopy links
Remote Copy System Information
Status: Started, Normal
Link Information
Target Node Address Status Options
s159 0:6:1 10.100.33.159 Down
s159 1:6:1 10.101.33.159 Down
receive 0:6:1 receive Up
receive 1:6:1 receive Up
14 HP 3PAR Storage system setup