3PAR Replication Adapter 4.0.1 for VMware vCenter Site Recovery Manager Implementation Guide

Failover

HP 3PAR Replication Adapter 4.0.1 for VMware Site Recovery Manager Implementation Guide

4 If the Remote Copy volume group role is Primary, start and sync Remote Copy volume

group

srm_1.r230 on the newly-protected site of the storage system.

10.2 Cleanup after Failover

The following cleanup is required if a failback is planned between the new protected site (i.e.

the original recovery site) and the new recovery site (i.e. the original protected site) after a

failover:

■ At the new recovery site (i.e. the original protected site):

◆ Delete failover protection group.

◆ Remove failover virtual machines from the inventory.

◆ Run showvlun command at the new recovery site HP 3PAR Storage System to see the

current LUN exposure and ensure that at least one active LUN is visible (an exposure can

be made to any host). If a LUN is not exposed, you must create at least one LUN via

createvlun command.

◆ Rescan the storage adapters.

# startrcopygroup srm_1.r230

# syncrcopy srm_1.r230

Synchronization request issued for group srm_1.r230 task ID = 353 354 355

356 357 358