3PAR Replication Adapter 4.0.1 for VMware vCenter Site Recovery Manager Implementation Guide

28
Failover
HP 3PAR Replication Adapter 4.0.1 for VMware Site Recovery Manager Implementation Guide
10.1.1 Example of Procedure after Failover
1 Check the Remote Copy link status from the newly-protected site (original recovery site) of
the HP 3PAR Storage System
.
2 If link status is up, check the current role of the Remote Copy volume group after failover
on the newly-protected site (original recovery site) of the HP 3PAR Storage System.
3 If the Remote Copy volume group role is Primary-Rev, start and sync the Remote Copy
volume group
srm_1.r230 on the newly-protected site of the HP 3PAR Storage System.
root@enodec1a6:~# showrcopy links
Remote Copy System Information
Status: Started, Normal
Link Information
Target Node Address Status Options
s230 0:6:1 10.100.33.230 up
s230 1:6:1 10.101.33.230 up
receive 0:6:1 receive up
receive 1:6:1 receive up
root@enodec1a6:~# showrcopy groups srm_1.r230
Remote Copy System Information
Status: Started, Normal
Group Information
Name Target Status Role Mode Options
srm_1.r230 s230 Stopped Primary-Rev Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
srm_vol_1 145 srm_vol_1 181 Stopped 2010-02-11 16:47:53 PST
srm_vol_2 146 srm_vol_2 182 Stopped 2010-02-11 16:47:53 PST
srm_vol_3 147 srm_vol_3 183 Stopped 2010-02-11 16:47:53 PST
srm_vol_4 148 srm_vol_4 184 Stopped 2010-02-11 16:47:53 PST
srm_vol_5 149 srm_vol_5 185 Stopped 2010-02-11 16:47:53 PST
srm_vol_0 154 srm_vol_0 180 Stopped 2010-02-11 16:47:53 PST
# setrcopygroup recover -f srm_1.r230
# syncrcopy srm_1.r230
Synchronization request issued for group srm_1.r230
task ID = 353 354 355 356 357 358