3PAR Replication Adapter 4.0.1 for VMware vCenter Site Recovery Manager Implementation Guide

HP 3PAR Storage System Setup

HP 3PAR Replication Adapter 4.0.1 for VMware Site Recovery Manager Implementation Guide

8.0 HP 3PAR Storage System Setup

Any HP 3PAR Storage System acting as an array manager (at the protected site or at the

recovery site) in VMware vCenter Site Recovery Manager setup must be configured with HP

3PAR Remote Copy.

The following are the HP 3PAR Storage System configuration items:

■ HP 3PAR Storage System configuration at the protected site and the recovery site.

◆ HP 3PAR Remote Copy setup.

Set up a Remote Copy link between the protected and recovery site. Create a Remote

Copy volume group at the protected site. A corresponding Remote Copy group is

automatically created at the recovery site. Refer to the HP 3PAR Remote Copy User’s

Guide for more information on how to set up HP 3PAR Remote Copy.

◆ Create virtual volumes.

Create the appropriate number of virtual volumes to meet the replication requirement

of the virtual infrastructure. Refer to the HP 3PAR InForm OS CLI Administrator’s Manual

for instructions on how to create virtual volumes.

NOTE: An HP 3PAR Remote Copy license is required on the HP 3PAR Storage

System. A Virtual Copy license is required if the failover test performs on the Site

Recovery Manager.