Manualshelf

HP 3PAR StoreServ 7000/7450 Storage Cabling Configuration Guide A: 2 Node Systems with Small 2.5-inch Drive Enclosures (QR482-96452, August 2013)

ManualsBrandsHP ManualsStorageHP 3PAR StoreServ 7400 2-node Storage Base for Storage Centric Rack
31323334353637383940
Attach DP-2 Chains to Enclosures
Red routing
1. Connect Node 0 (DP-2) to the I/O 0 (DP-1) on the B drive enclosure closest to the controller.
2. Connect all B drive enclosures from (DP-2) to (DP-1) working away from the controller.
Green routing
1. Connect Node 1 (DP-2) to I/O 1 on the B drive enclosure farthest from the controller.
2. Connect all B drive enclosures from (DP-2) to (DP-1) working toward the controller.
NOTE: The two adjacent enclosures are not directly connected.
40 Cabling HP 3PAR StoreServ 7000/7450