HP 3PAR F-Class, T-Class, StoreServ 10000 Storage Troubleshooting Guide (QL226-96953, May 2013)

Figure 2 T400 Rear View
Service Processor Placement
The Service Processor (SP) is located at the bottom of the cabinet and is designed to support all
actions required for maintenance of the storage system, providing real-time, automated monitoring.
The SP also supports remote access to diagnose and resolve potential problems.
The SP is usually installed directly above the PDUs and below the battery tray (Figure 3 (page 9))
and is powered internally by the storage system. The SP does not require an external power
connection.
8 Component Numbering for T-Class Storage System