HP 3PAR F-Class, T-Class, StoreServ 10000 Storage Troubleshooting Guide (QL226-96953, May 2013)

A blue illuminated lamp denotes that power is being supplied to a power bank. When the blue
lamp is not illuminated, the power bank is not receiving AC input.
Service Processor LEDs
There are two types of service processors.
Supermicro Service Processor
The Supermicro SP LEDs are located at the top of the SP (Figure 84 (page 78)).
Figure 84 Supermicro SP LEDs
Table 31 Supermicro SP LED Displays
IndicatesAppearanceLED
SP is off.No lightPower
SP is on.Steady green light
No hard drive activity.No lightHard disk drive
Hard drive activity.Flashing amber light
Port is not connected.No lightNIC Port 1, 2
Port is connected.Steady green light
Network activity.Flashing green light
SP temperature is normal.No lightOverheat
SP temperature is overheating.Steady red light
Supermicro II Service Processor
Supermicro II SP LEDs are located at the top of the SP (Figure 85 (page 79)).
78 Understanding F-Class Storage System LED Status