HP 3PAR F-Class, T-Class, StoreServ 10000 Storage Troubleshooting Guide (QL226-96953, May 2013)

VLUN Suggested Action
Check the export status and port status for the VLUN and HOST with CLI commands such as
showvlun, showvlun -pathsum, showhost, showhost pathsum, showport, servicehost
list, etc. For example:
cli% showvlun -host cs-wintec-test1
Active VLUNs
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
2 BigVV cs-wintec-test1 10000000C964121C 2:5:1 host
-----------------------------------------------------------
1 total
VLUN Templates
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
2 BigVV cs-wintec-test1 ---------------- --- host
cli% showhost cs-wintec-test1
Id Name Persona -WWN/iSCSI_Name- Port
0 cs-wintec-test1 Generic 10000000C964121D ---
10000000C964121C 2:5:1
cli% servicehost list
HostName -WWN/iSCSI_Name- Port
host0 10000000C98EC67A 1:1:2
host1 210100E08B289350 0:5:2
Lun VVName HostName -Host_WWN/iSCSI_Name- Port Type
2 BigVV cs-wintec-test1 10000000C964121D 3:5:1 unknown
VV
Displays Virtual Volumes (VV) that are not optimal. Checks for VVs and Common Provisioning
Groups (CPG) whose state is not normal.
Format of Possible VV Exception Messages
VV vv:<vvname> "IO to this volume will fail due to no_stale_ss policy"
VV vv:<vvname> "Volume has reached snapshot space allocation limit"
VV vv:<vvname> "Volume has reached user space allocation limit"
VV vv:<vvname> "VV has expired"
VV vv:<vvname> "Detailed State: <state>" (failed or degraded)
VV cpg:<cpg> "CPG is unable to grow SA (or SD) space"
VV Suggested Action
Check status with CLI commands such as showvv, showvv -d, showvv -cpg.
Troubleshooting Storage System Components 125