3PAR Remote Copy 2.3.1 User's Guide (320-200175 Rev A, October 2009)

3.4
Gathering Necessary Information
Remote Copy User’s Guide InForm OS Version 2.3.1
After the Remote Copy configuration is complete, you can use the InForm CLI
showport -rcip command or the showport -rcfc command to confirm the addresses you
specified during the setup.
Use the following figures to help visualize and organize your desired Remote Copy
configuration:
Figure 3-1. Network and Remote Copy Over IP Setup Information (Initial Pair)
Network
System 1
Backup
Gateway
Active
Gateway
System 2
Basic Remote Copy Pair Information:
TCP/IP