3PAR Remote Copy 2.3.1 User's Guide (320-200175 Rev A, October 2009)

B.80
stoprcopygroup
Remote Copy User’s Guide InForm OS Version 2.3.1
NOTES
■ If a group’s target has the mirror_config policy set and the group is a primary group,
then this command will be mirrored to that target and the corresponding secondary group
will be stopped. If the
mirror_config policy is set and the group is a secondary, then this
command will fail.
■ If the mirror_config policy is not set and this command is issued on a secondary group,
then the corresponding primary group will also be stopped as a result of this command.
■ In sync mode, this command creates snapshots that are used for synchronizing the primary
and secondary groups if
startrcopygroup is run later.