3PAR Remote Copy 2.3.1 User's Guide (320-200175 Rev A, October 2009)

B.78
stoprcopy
Remote Copy User’s Guide InForm OS Version 2.3.1
EXAMPLES
The following example disables the Remote Copy functionality of all Remote Copy volume
groups:
NOTES
■ If the -stopgroups option is not used, all groups must already be stopped.
■ An older version of this command provided specifiers to disable the primary or backup
systems. These specifiers were deprecated in InForm OS release 2.2.3.
■ Unless the -stopgroups option is used, the command will fail if there are any Remote
Copy groups that are started. If the
-clear option has been used, the configuration is
completely erased. Consequently, Remote Copy operations can not be restarted using only
the
startrcopy command. The configuration must be rebuilt. Therefore, the -clear
option requires confirmation with the
-f option, the TPDFORCE environment variable, or
by interactively typing,
y. Refer to the InForm OS CLI Administrator’s Manual for
information about using environment variables.
cli% stoprcopy -stopgroups