3PAR Remote Copy 2.3.1 User's Guide (320-200175 Rev A, October 2009)

B.7
admitrcopyvv
InForm OS Version 2.3.1 Remote Copy User’s Guide
COMMAND
admitrcopyvv
DESCRIPTION
The admitrcopyvv command adds an existing virtual volume to an existing Remote Copy
volume group.
SYNTAX
admitrcopyvv <VV_name> <group_name> [<target_name>:<sec_VV_name>]
AUTHORITY
Service
OPTIONS
None.
SPECIFIERS
<VV_name>
Specifies the name of the existing virtual volume to be admitted to an existing Remote
Copy volume group that was created with the
creatercopygroup command (see
page B.18).
<group_name>
Specifies the name of the existing Remote Copy volume group created with the
creatercopygroup command (see page B.18), to which the volume will be added.
<target_name>:<sec_VV_name>
The target name associated with this group, as set with the creatercopygroup command
(see page B.18). The target is created with the creatercopytarget command (see
page B.20).
<sec_VV_name> specifies the name of the secondary volume on the target
system. In a Synchronous Long Distance Remote Copy setup, this specifier is required for
every target of the group.
NOTE: You need access to the domain of the specified group (<group_name>) in
order to run this command.