HP 3PAR Peer Motion Guide

The detail pane displays Summary, Settings, Active VLUNs, and Hosts information. For information
on the detail pane screens, see “Summary Screen (page 52), “Settings Screen (page 52), Active
VLUNs Screen” (page 53), and “Hosts Screen” (page 53).
Summary Screen
The Summary screen provides the following information for both the source and destination systems:
DescriptionFieldGroup
The virtual volume's name.NameGeneral
The virtual volume ID.ID
The domain in which the volume is located.Domain
The name of the volume set to which the volume belongs.Set
The type of volume (base, physical copy, or virtual copy).Type
Indicates whether the selected volume is fully provisioned or a
thinly provisioned virtual volume.
Provisioning
The volume's World Wide Name.WWN
The volume from which the selected volume was copied.Copy Of
The number of copies of the selected volume.Copies
Indicates whether the volume is read-only (RO) or read-write
(RW).
Mode
Indicates the volume's RAID type.RAID
Indicates the volume's size (in GiB).Virtual Size
The host to which the volume is exported.Exported To
The number of new virtual volume alerts.New AlertsHealth
The current state of the virtual volume.State
Description of the virtual volume's state.State Description
Select the device type, Fast Class (FC), Near Line (NL), or Solid
State Device (SSD). The capacity and capacity usage of the
selected device type displays in graphical form.
Device TypeCapacity
The logical capacity.Logical
The raw capacity.Raw
The allocation of the volume's admin, copy, and user space.Virtual Volume Allocation
Settings Screen
The Settings screen displays a side-by-side comparison of source and destination volume settings.
DescriptionFieldGroup
The type of provisioning of the volume (Thin or Full).ProvisioningUser Space
Provisioning
The name of the CPG associated with the volume.CPG
The device type of the volume (for example, FC).Device TypeUser Space Allocation
/ Copy Space
Allocation
52 Using Peer Motion in HP 3PAR Management Console Manager