HP 3PAR Peer Motion Guide

Ensure that destination array specified is already added and that the correct array ID is
specified.
OIURSLMS10001
Ensure that the source array specified is already added to OIU and that valid UID is used.OIURSLMS10002
Ensure that the unique name specified for the source host is valid.OIURSLMS10003
Ensure that the volume you are trying to migrate is present in the source array. Wait for
sometime and retry.
OIURSLMS10004
Ensure that the volume specified and the corresponding linked volumes are not under
migration.
OIURSLMS10005
Ensure that all prerequisites are met.OIURSLMS10006
Verify Support Matrix and restrict the number of volumes accordingly.OIURSLMS10007
Ensure that proper migration ID is specified.OIURSLMS10008
Please create domain before triggering migration.OIURSLMS10009
All volumes should be in same domain for domain based migrations.OIURSLMS10010
Please ensure that the IP address and login credentials are correct.OIURSLDST0001
If necessary remove the array and add it again.OIURSLDST0002
Contact HP Support Center.OIURSLDST0003
Check Support Matrix and upgrade HP 3PAR.OIURSLDST0004
Apply Peer Motion license on HP 3PAR.OIURSLDST0005
Ensure that the storage system is already added and that the proper ID is specified.OIURSLDST0006
Use other type of migration or upgrade to a firmware that supports MDM.OIURSLDST0007
Fix the issue according to the error observed and retry.OIURSLDST0008
Contact HP Support Center.OIURSLDST0009
Use TPDCertVerifier.bat to update trust store.OIURSLDST0010
Migrations have to be in complete/abort state for the storage system to be removed.OIURSLDST0011
Migrations have to be in complete/abort state for the storage system to be removed.OIURSLSRC0012
Retry the operation after some time.OIURSLSRC0013
Wait till the ongoing migration is complete or delete the migration and then retry the
operation.
OIURSLSRC0014
Delete the host(s) that has the peer ports assigned to it to proceed.OIURSLSRC0015
Please ensure that the hosts associated with migration have persona 2, 11, 13 or 14.OIURSLSRC0016
Ensure that singlevv option is only used when the source array is of type HP 3PAR.OIURSLSRC0017
Ensure that the number of nodes migrated does not exceed four.OIURSLSRC0019
Ensure that both the source and destination arrays are running the firmware version
necessary for Online Windows Cluster migration.
OIURSLSRC0120
Ensure that only supported array models are used for Online Windows Cluster migration.OIURSLSRC0121
Ensure that each peer port is configured with twice as many NPIV ports as the number of
nodes being migrated.
OIURSLSRC0122
This user is not part of the supported user groups.OIURSLSEC0000
Please try again with correct username and password.OIURSLSEC0001
Delete the host group objects that are not required or connect the peer port to another
target port.
OIURSLSRC0006
Troubleshooting HP 3PAR Peer Motion Utility 109