HP 3PAR Peer Motion Guide

Ensure that the correct object type is specified.OIURSLDB1003
Contact HP Support Center.OIURSLDB1004
Retry the operation after some time. If the problem persists contact HP Support Center.OIURSLDB1005
Ensure that the object is not already added and that the dependent objects are availableOIURSLDB1006
Ensure that the object is already added.OIURSLDB1007
Failed to unlock a file. Please restart the application service.OIURSLDB1008
Contact HP Support Center.OIURSLDB1009
Ensure that valid data is entered.OIURSLDB1010
Install appropriate source array plugin or choose right source array typeOIURSLCS1000
Ensure that proper array ID is provided.OIURSLCS1001
Ensure that there is a one-to-one mapping between the peer ports and the source host ports,
and that network connectivity between the host, source array and destination array is
proper.
OIURSLCS1002
Use appropriate port number.OIURSLCC1000
Use true/false. No value will take default.OIURSLCC1001
Use true/false. No value will take default.OIURSLCC1002
Ensure that source array UID is provided as input.OIURSLMC1000
Either the srchost or srcvolmap or volmapfile should be provided.OIURSLMC1001
Ensure that entries are provided in accordance with the user guide.OIURSLMC1003
Provide migtype as online or MDM or offline.OIURSLMC1004
Provide a number greater than 1.OIURSLMC1005
With AO migration type clunodes parameter should be more than or equal to 1. See
Support Matrix for max value.
OIURSLMC1006
Number of volume map entries should be between 1 and 3OIURSLMC1007
Default values required at least for one entry of volume mapOIURSLMC1008
Either provide the values through volume map or provide default values via destprov or
destcpg options.
OIURSLMC1009
Provide a valid identifier for source volume.OIURSLMC10010
Specify destprov as 'thin' or 'full'.OIURSLMC10011
Specify destprov as 'thin' or 'full'.OIURSLMC10012
destcpg should be provided as cpg information is missing for at least one entry in volume
map.
OIURSLMC10013
If at least one of the volume being migrated is provisioned to a host then migration type
can be either be MDM or online.
OIURSLMC10014
If source host is mentioned, both destprov and destcpg should be specified.OIURSLMC10015
Remove the remote copy relation for the volume(s) selected for migration.OIURSLMC10016
Remove the iSCSI presentations for the volume(s) selected for migration.OIURSLMC10017
Remove the volume(s) selected for migration from reserved group(s).OIURSLMC10018
Create another mogration, when this Array had finished migration and has been removed
from migration list.
OIURSLMC10019
108 Troubleshooting