HP 3PAR Peer Motion Guide
removesource
Removes source storage system.
DESCRIPTION
The removesource command removes already added source storage system and clears all
related migrations.
If the state of the source storage system is:
• “No migration created,” the command will delete the source storage system from the Peer
Motion Utility
• “Active migration (prepared or data transfer in progress)” the command will output error
• ”Completed migrations” the command removes already added source storage system and
clears all related migrations.
NOTE: When using the removesource command, historic information about previous completed
migrations related to the source/destination systems will be removed.
PARAMETERS
Mandatory/optionalDescriptionName
MandatoryUnique number that represents
a source in Peer Motion Utility.
uid
MandatoryType of source storage system.type
EXAMPLES
removesource –uid 2FF70002AC00DB5 –type 3PAR
> SUCCESS: Removed source storage system.
removedestination
Removes an added destination storage system.
DESCRIPTION
The removedestination command removes already added destination storage system and
clears all related migrations.
NOTE: When using theremovedestination command, historic information about previous
completed migrations related to the source/destination systems will be removed.
PARAMETERS
Mandatory/optionalDescriptionName
MandatoryUnique number that represents
a source in the Peer Motion
Utility.
uid
OptionalType of source storage system.type
EXAMPLES
removedestination –uid 2FF70002AC003F8E
SUCCESS: Removed destination storage system.
removesource 103