HP 3PAR Windows 2012 and Windows Server 2008 Implementation Guide

5. By default, the 3PAR Support for SCSI 3 appears as 0x00000000 (0) in the Data column.
To confirm, click
Start→Run→regedit→Computer→HKEY_LOCAL_MACHINE→SYSTEM→CurrentControlSet→Services→v3paraa→Parameters.
See Figure 33 (page 74)
Figure 33 V3PARAA Parameters
6. To enable HP 3PAR SCSI-3 support, click the EnableSupportSCSI3V3paraa script
(Figure 34 (page 74)), then reboot the server after the script runs.
Figure 34 Enabling Script Support
7. After the script runs, the HP 3PAR Support SCSI-3 appears as 0x00000000 (1) in Data
column.
74 Using the Veritas Cluster Server