HP 3PAR StoreServ Concepts Guide: HP 3PAR OS 3.1.3

drive enclosure A component used for housing drive cages in the front of the enclosure and nodes and I/O
modules in the rear of the enclosure.
drive magazine An electronic circuit board mounted on a mechanical structure that is inserted into a drive bay
in a drive cage. A drive magazine holds up to four physical disks.
drive magazine
filler panel
The panel used to seal off an empty drive bay. All drive bays in a drive cage must be sealed for
EMI and airflow considerations.
drive mount A metal bracket used to secure a physical disk to a drive magazine. Each disk must be secured
by two drive mounts.
encryption key A cryptographic key that is not exposed outside of the drive itself. The encryption key is used to
encrypt and decrypt all data stored on a drive.
ESI Enclosure Services Interface. Interface on the DC2 and DC4 drive cages through which the node
software communicates to the cage enclosure services controller to obtain enclosure and cage
status and control the cage behaviors.
event A detectable system occurrence.
export To present a virtual volume to a host. Exporting makes a volume available to a host by creating
an association between the volume's name and a LUN (logical unit number) for the specified host
and port.
Fast Class Drive type: either Fibre Channel or Serial Attached SCSI (SAS). With regard to drive types and
drive capacities, the abbreviation FC applies to Fast Class. With regard to ports, the abbreviation
FC applies to Fibre Channel only.
FC-AL Fibre Channel Arbitrated Loop. A fast serial bus interface standard used to connect storage
devices to servers.
Fibre Channel
adapter
A Fibre Channel PCI host bus adapter (HBA) located in a controller node. The Fibre Channel
adapter connects a controller node to a host or to a drive chassis.
fully provisioned
virtual volume
A virtual volume (snapshot) with a set amount of user space and for which snapshot administration
space and snapshot data space draw resources from a Common Provisioning Group (CPG).
Gigabit Ethernet
adapter
A network adapter located in a controller node. The Gigabit Ethernet adapter connects a controller
node to a network in order to transfer data via the network.
grow To increase the size of a virtual volume or CPG.
growth increment The unit of storage space by which the system creates and allocates additional logical disks to
a Common Provisioning Group (CPG) when the volumes in that CPG require additional resources.
The minimum growth increment varies according to the number of controller nodes in the system
(from 8 GB for a two-node system to 32 GB for a eight-node system).
growth limit An optional setting that enables you to specify the maximum size to which a CPG can grow.
growth warning An optional setting that enables you to specify the size at which the system alerts you to the
amount of CPG growth.
host A path or set of paths, defined as either WWN or iSCSI names, to one or more ports on a system.
host definition The name of the host and the list of the paths (WWN or iSCSI) assigned to the host, if any. If
you remove all the paths assigned to the host, the host name becomes the host definition.
host persona A set of behaviors that allows hosts connected to FC or iSCSI ports on the system to deviate from
the default host behavior.
host set VLUN
template
A VLUN template that allows any host that is a member of the host set to see a volume.
host-sees VLUN
template
A VLUN template that allows a specified host connected to any port to see a virtual volume as a
specified LUN (logical unit number).
HP 3PAR Recovery
Manager Software
A data-protection solution that provides restore operations for a variety of platforms, such as
Oracle, SQL Server, Exchange, and more.
HP 3PAR Remote
Copy Software
Software that enables you to create and continually update backup remote copies of virtual
volumes and use those copies for disaster recovery, if necessary.
91