HP 3PAR StoreServ Concepts Guide: HP 3PAR OS 3.1.3

Default value: Please provide contact information such as name, phone number,
and e-mail address
Description: Specifies the name of a person or group responsible for maintaining the storage. This
value can be changed by the manager at any time.
System Name
Access: Read-only
MIB definition: sysName
Data type: Display string (max. 255 characters)
Default value: None
Description: Indicates the system name, which is set during initialization and setup of the system.
This helps to identify this system from other systems. The value cannot be changed by the manager.
System Location
Access: Read/write
MIB definition: sysLocation
Data type: Display string (max. 255 characters)
Default value: Please provide location description where the device resides
such as building, room, and rack number
Description: Contains the user-defined location of the system. This helps to indicate where the
storage system is located. For example, the location may be indicated as follows: Building 1,
room 4, rack 3. This value can be changed by the manager at any time.
The HP 3PAR MIB
The HP 3PAR MIB contains proprietary information that defines the configuration and behavior of
the system and may be useful for network management. Currently, the HP 3PAR MIB only contains
only the alertNotify trap definition. Table 12 (page 78) summarizes the contents of this trap.
Table 12 Contents of the alertNotify trap
AccessDescriptionObject Descriptor
Read-onlyIndicates which system hardware, software, or logical component caused
the alert or alert state change.
component
Read-onlyDetailed description of the alert or alert state change, displayed as an alert
string (for example: PR table <table_name> is corrupt). For
details
information about system alerts, go to http://www.hp.com/support/hpgt/
3par and select your server platform.
Read-onlyNode identification number, an integer from 0 through 7 that indicates which
system controller node reported the alert or alert state change.
nodeID
Read-onlySeverity level of the alert or alert state change, an integer from 0 to 5. See
the HP 3PAR MIB for definitions for each integer.
severity
Read-onlyTime the alert or alert state change occurred, in DDD mmm dd hh:mm:ss
ZZZ yyyy format (for example: Mon, Jan 01 12:30:34 PST 2005).
timeOccurred
Read-onlyAlert ID. The alert ID uniquely identifies an outstanding alert on some object
within the system. Alert IDs are automatically generated by the HP 3PAR OS
id
and increment when a new alert on a new object is detected. If an alert is
generated on an object, and alerts already exist in the system, the alert ID
is removed. For alert state traps, the alert ID is the same as the ID of the trap
that indicated the original problem.
78 HP 3PAR SNMP Infrastructure