HP 3PAR StoreServ 7450 Storage Installation Guide

2. If applicable, check the Enable DNS Support box and provide the values for the following
fields:
• Domain Name
• DNS Server(s)
To adjust the network speed, expand the Advanced option to change the settings.
If you are setting up a VSP in DHCP network environment, enter the permanent IPv4 address
you want to assign to it.
CAUTION: Be sure to enter the permanent SP IP address. If you continue to use the temporary
SP IP address, you may prevent additional system setups from being completed successfully.
If you are setting up a physical Service Processor, the IP address field displays the permanent
IP address previously assigned in the Service Processor IP Setup wizard.
3. Click Next.
Figure 53 Configuring Service Processor Networking Page
Remote Support
Remote Support enables HP to provide you with the best possible support for your storage system,
including the following:
• Timely remote service
• Remote online software updates
• Accelerated troubleshooting and issue resolution
64 Setting Up the Service Processor and Storage System