HP 3PAR StoreServ 7450 Storage Installation Guide

• Time and Region
• Change Passwords
• Summary
• Applying Settings
• Finish
To launch the wizards in SmartStart:
1. Verify the service processor is powered on.
2. Click the Initialize Service Processor link in SmartStart wizard step 2, Initialize Service Processor.
3. Enter the SP IP address and click OK.
NOTE: When configuring in a DHCP network environment, enter the VSP temporary IP
address.
Figure 49 Initialize Service Processor Page
NOTE: A security certificate error may occur when there is a problem with a web server's
use of the certificate and a blocking page will appear. You can ignore the warning and
continue to go to the website.
4. On the browser window, enter setupusr in the User Name box, and leave the password
box blank.
5. Click OK.
NOTE: The Service Processor Setup Wizard may not display correctly when using Microsoft
Internet Explorer 10 with default security settings. If the wizard continues to display incorrectly,
try refreshing the browser page.
60 Setting Up the Service Processor and Storage System