HP 3PAR StoreServ 7450 Storage Installation Guide

Figure 47 Assign IP Address
While you are entering an IP address, the IP Address field indicates an error. After you have
entered a valid IP address, the Subnet Mask and Gateway fields are automatically populated.
Figure 48 Subnet Mask and Gateway Fields Populated
You can customize settings for the Subnet Mask and Gateway if required.
7. Select Next, review the Summary screen, and then select Next when you are ready.
The settings are applied.
NOTE: You may see a dialogue box indicating the laptop is unable to connect to the SP.
This dialog box remains displayed until the adapter settings have been changed in the SP
and verified. No action is necessary; the dialogue box closes within three minutes.
8. Select Finish when completed.
9. Repeat Step 3 and reconfigure the original LAN settings on the laptop.
10. Disconnect the network cable from the laptop, and connect the SP to the customer LAN.
Connecting to a Physical Service Processor 55