HP 3PAR Peer Motion Guide

Name of the host/host set or
full name including path of the
srchost
host for which all source
volumes should be considered
for migration. This should not
be there if srcvolmap or
volmapfile is there.
Note: In the case of host set, the
name of host set should be
preceded by “set:”
CPG’s friendly name where the
migrated volumes will be made
available. If not provided
destcpg
Provisioning type of the volumes
that will be created in
destprov
destination as a result of
migration (Thin/full)
OptionalView SPOCK (at http://
www.hp.com/storage/spock)
migtype
and choose appropriate type
(MDM/online/offline). For
different version of operating
system, we can have different
migration type. Since, there is
no host interaction layer, user
has to give this as manual
input. If this parameter is not
provided, default will be offline.
If this parameter is not
applicable, error should be
thrown.
OptionalUID of the destination storage
system. Since there is a 1:1
destinationuid
mapping, this is an optional
parameter as the destination
will be auto-selected.
OptionalNumber of nodes in cluster.
This signifies that the host under
clunodes
consideration for migration is
clustered host. Also, the number
of NPIV ports created will be
same as specified in this
param. This happens only for
almost online migration type.
OptionalUse to migrate a subset of
volumes provisioned to a host.
singlevv
EXAMPLES
Createmigration -sourceuid 2FF70002AC001BA1 -srcvolmap [{"test","thin","test"}]
>SUCCESS: Migration job submitted successfully. Please check status/details using
showmigration command.
Migration id: 1397243589759
Createmigration -sourceuid 2FF70002AC001BA1 -srcvolmap [{"test","thin","test"}] -migtype
MDM -clunodes 2
>SUCCESS: Migration job submitted successfully. Please check status/details using
showmigration command.
Migration id: 1397243589759
createmigration 99