HP 3PAR Peer Motion Guide

OptionalThis is storage system family
name (e.g. 3PAR).
type
OptionalThis command can be used to
print delimited output.
csvtable
OptionalRedirects the output of the
command to a file.
filewrite
OptionalDisplay all details with
headings.
all
OptionalAny argument that follows
showcols depicts field to
showcols
display (columns).Accepts a
comma separated list of column
names.
OptionalThis is serial number or WWN
or hyphenated WWN.
unique_id
OptionalList of host ports hyphenated
64 bit WWN (N:S:P). Peer will
be marked as peer.
peer_ports
OptionalDisplays the list of column
names applicable to that
command.
listcols
OptionalFirmware version.firmware
OptionalThe IP address/FQDN of the
management server that
manages this storage system.
management_server
OptionalOperational state of the
storage system (Good, Failed,
Attention).
operational_state
EXAMPLES
showdestination
NAME TYPE UNIQUE_ID FIRMWARE MANAGEMENT_SERVER OPERATIONAL_STATE PEER_PORTS
DMMT3PAR02 3PAR 2FF70002AC003F9C 3.1.3 15.218.169.236 Normal
2211-0202-AC00-3F9C(2:1:1) 2311-0202-AC00-3F9C(3:1:1)
showconnection
Lists connected destination and source storage systems.
DESCRIPTION
By default, the showconnection command shows a map of all connected source and destination
storage systems. There should be 1:1 mapping between source and destination storage systems
and destination and source systems for peer port FC connection. Given a source storage system,
this shows all the configured destination storage systems, it can see and vice versa.
PARAMETERS
Mandatory/optionalDescriptionName
OptionalThis command can be used to
print delimited output.
csvtable
96 HP 3PAR Peer Motion Utility Commands