HP 3PAR Peer Motion Guide

C HP 3PAR Peer Motion Utility Commands
NOTE: Examples shown in this sections are examples only and may not reflect your system output.
addsource
Adds a source storage system.
DESCRIPTION
The addsource command adds a source storage system to the Peer Motion Utility that is intended
to be migrated.
While adding a new source or destination HP 3PAR StoreServ Storage System that has 3.1.2 MU3
P16 or later. applied, the following error message appears:
“ERROR: OIUERRDST0010 Unable to validate
certificate. OIURSLDST0010 Use TPDCertVerifier.bat to update trust
source at <filepath>\InformMC\security\HP-3PAR-MC-TrustSource.” If this error
occurs, perform the following steps to add a destination:
NOTE: This procedure is only applicable to HP 3PAR OS 3.1.2 MU3 P16 or 3.1.3, all versions.
NOTE: If you have already added one HP 3PAR StoreServ Storage System that has HP 3PAR
OS 3.1.2 MU3 P16 or later, the HP-3PAR-MC-TrustStore file will be updated for that storage system.
The same HP-3PAR-MC-TrustStore file should be updated for all other HP 3PAR StoreServ Storage
Systems that you want to add as a source or destination storage system.
1. Login to the server where HP 3PAR Peer Motion Utility is running.
2. Locate the trustsource file as displayed in the error message. Copy the file
HP-3PAR-MC-TrustStore, if available, to the logged in user’s home directory at:
\InFormMC\security.You can use the echo command, %HOMEDRIVE%%HOMEPATH% to
find the current user’s home directory.
3. Browse to the install location C:\Program Files (x86)\Hewlett-Packard\hp3parpmu\bin via
the command prompt and run the TPDCertVerifier.bat.
4. Enter the IP address of 3PAR StoreServ and see its certificate details. If you accept the certificate,
the trust store will be updated at user’s home directory.
5. Replace the existing trust store file as displayed in the error message with the updated trust
store file at the user’s home directory.
6. Perform addsource again to add HP 3PAR StoreServ Storage System.
PARAMETERS
Mandatory/optionalDescriptionName
MandatoryStorage system family type like
3PAR.
type
MandatoryIP address of the management
station to connect to get details.
mgmtip
MandatoryUsername to be used to connect
to management application.
user
MandatoryPlain text password to be used.password
OptionalFriendly name of the storage
system. This is required
name
especially when there are
multiple storage systems
92 HP 3PAR Peer Motion Utility Commands