HP 3PAR Peer Motion Guide

Ports Screen
The Ports screen contains a Peer Capable Ports tab and a Host Ports tab when viewing both source
and destination systems. When viewing the destination system, the Peer Ports tab is also included.
All three tabs are divided into a list pane and a detail pane and provide similar information.
The list pane provides the following information:
DescriptionColumn
The port location in Node:Slot:Port format.Position
The port label.Label
WWN or MAC address of the connected device.WWN/MAC
The state of the port.State
Indicates whether the port is FC, iSCSI, RCIP, or RCFC.Type
Indicates whether the connection device type is Host or Peer.Connected Device Type
The name of device that the port is connected to.Connected Device
Port firmware mode setting: Initiator or Target.Mode
The partner port, in Node:Slot:Port format.Partner
The WWN of the partner port.Partner WWN
Indicates whether the system is in a failover state.Failover State
56 Using Peer Motion in HP 3PAR Management Console Manager