HP 3PAR Peer Motion Guide

The list pane provides the following information:
DescriptionColumn
The port location in Node:Slot:Port format.Position
Indicates whether the port is a peer port.Label
The WWN or MAC address of the connected device.WWN/MAC
The state of the port.State
Indicates whether the port is FC, iSCSI, RCIP, or RCFC.Type
Indicates whether the connection mode is Host or Peer.Connection Mode
Indicates whether the connection device type is Host or Peer.Connected Device Type
Name of device(s) that the port is connected to.Connected Device
Port firmware mode setting-Initiator, Target, Peer, or Suspended.Mode
The partner port.Partner
The WWN of the partner port.Partner WWN
Indicates if the system is in a failover state.Failover State
The detail pane contains a Summary tab. If the connected device type is Host, there a Hosts tab
is included.
The Summary Screen Detail Pane
The detail pane of the Summary screen displays the following:
DescriptionFieldGroup
The port location in Node:Slot:Port format.PositionGeneral
Port World Wide Name.Port WWN
Node World Wide Name.Node WWN
Indicates whether the port is FC, iSCSI, RCIP, or RCFC.Type
Rate that data can be transferred over the port (1 Gbps, 2 Gbps or 4 Gbps).
When there is no specified value, no connection exists.
Rate
Type of device that the port is connected to: Host or Peer.Connected Device
Type
Viewing Port Information 39