HP 3PAR OS 3.1.3 P02 Release Notes

1 Overview of HP 3PAR OS
This release notes document describes the modifications and known issues for Patch 02. The
application of this patch is intended for HP 3PAR OS 3.1.3.202(GA).
NOTE: This patch must be installed before upgrading HP 3PAR OS 3.1.3 GA to HP 3PAR OS
3.1.3 MU1.
Supported platforms
The HP 3PAR Configuration Matrix for HP 3PAR OS 3.1.3 contains information about supported
hardware and software platforms. For additional information, go to the Single Point of Connectivity
Knowledge for HP Storage Products (SPOCK) website: http://www.hp.com/storage/spock.
Verifying the patch installation
The installation of Patch 02 can be verified from an interactive CLI session. Issue the CLI command
showversion -a -b to verify that Patch 02 is listed.
cli% showversion -a -b
Release version 3.1.3.202
Patches: P01, P02
Component Name Version
CLI Server 3.1.3.202
CLI Client 3.1.3.188
System Manager 3.1.3.202
Kernel 3.1.3.202
TPD Kernel Code 3.1.3.202
TPD Kernel Patch 3.1.3.214 (P02)
...
NOTE: When displaying the showversion command output from the Service Processor, the
CLI Client version is fixed in the SP code, and might differ from the output displayed on another
system.
NOTE: Applying this patch to the HP 3PAR OS might restart the affected OS components. With
these restarts, events and alerts might be generated and this is an expected behavior. The system
continues to serve data, but existing CLI or IMC sessions might be interrupted.
NOTE: HP recommends installing patches in the same sequence as they are released, unless
instructed otherwise.
Components
VersionComponent
3.1.3.202CLI Server
3.1.3.188CLI CLient
3.1.3.214 (P02)TPD Kernel Patch
4 Overview of HP 3PAR OS