HP 3PAR OpenVMS Implementation Guide (763874-002)

4 Configuring the HP 3PAR StoreServ Storage system
running HP 3PAR OS
This section describes how to configure the HP 3PAR StoreServ Storage system running HP 3PAR
OS.
Ensure that you complete the following setups before connecting the HP 3PAR StoreServ Storage
system port to a device.
Configuring ports for fabric connection
To configure HP 3PAR StoreServ Storage system ports for a fabric connection, complete the following
procedure for each port connected to the fabric.
CAUTION: Before taking a port offline in preparation for a fabric connection, ensure that the
port has not been previously defined and it is not already connected to a host. This interrupts the
existing host connection. If the HP 3PAR StoreServ Storage system port is already configured for
a fabric connection, you can ignore step 2, since you do not have to take the port offline.
1. Click HP 3PAR Management Console and select the IP.
Figure 1 HP 3PAR Management Console
2. Enter the username and password.
3. Click OK.
Configuring ports using GUI
1. Click Systems.
8 Configuring the HP 3PAR StoreServ Storage system running HP 3PAR OS