HP 3PAR OpenVMS Implementation Guide (763874-002)

Figure 13
NOTE: To create thinly provisioned Virtual Volumes, an HP 3PAR Thin Provisioning license is
required.
For more information on creating volumes for the HP 3PAR OS version that is used on the HP 3PAR
StoreServ Storage system, see the HP 3PAR Management Console Help and the HP 3PAR OS
Command Line Interface Reference.
These documents are available at the HP BSC website hp.com/go/3par/.
NOTE: The commands and options for creating a virtual volume might differ for the previous
versions of HP 3PAR OS.
Exporting virtual volumes using GUI
Figure 14 HP 3PAR Management Console
1. Click Provisioning on the lower left corner of the HP 3PAR Management Console screen.
2. Expand the storage system view.
3. Expand the Virtual Volumes view.
4. Click Unexported.
5. On the upper top corner of the screen, click Virtual Volumes in the summary view.
The available Virtual Volumes are listed.
6. Right-click Virtual Volume and click Export.
NOTE: For the New Persona 12 OpenVMS in 3.1.2 MU2/MU3 and 3.1.3, VIRTUAL VOLUME
0 refers to SCSI controller. Therefore, VIRTUAL VOLUME 0 is not required.
18 Creating Virtual Volumes on HP 3PAR StoreServ Storage systems