HP 3PAR OpenVMS Implementation Guide (763874-002)

Step 2
Figure 11 Create Virtual Volume
1. Right-click Virtual Volume.
2. Specify the name of the virtual volume in Name.
3. Select Show Advanced options panel(s).
This is required for setting the UDID for the Virtual Volumes. Otherwise, the UDID will be
allotted automatically by the HP 3PAR Storage Array.
4. Clear Auto to manually create an ID.
NOTE: If Auto is selected, then the array automatically assigns the next available ID.
5. Click Finish.
16 Creating Virtual Volumes on HP 3PAR StoreServ Storage systems