HP 3PAR Management Console 4.5.1 Release Notes

1.3 Modifications to the HP 3PAR Management Console
The following items have been addressed in this release.
DescriptionItemIssue ID
Partner Port in iSCSI lists IP address as 255.255.255.255 and in
the table header, the Partner WWN displays where the Partner IP
should be. This issue was fixed with this release.
Console and showport -ids
command do not display the correct
iSCSI IP address and iSCSI name for
the failover partner port
80417
The Grown Copy Space column in Virtual Volumes table does not
adequately describe the displayed data, which could cause
Need better description/label for
Grown Copy Space column in Virtual
Volumes table
93871
confusion when interpreting the data. The text Cumulative was
prepended to Grown Admin Space, Grown User Space, and Grown
Copy Space to indicate that these columns are a historical and
cumulative sum of how much the virtual volume grew, each time it
was grown. This issue was fixed with this release.
The Physical Disks table shows remaining disk threshold for SSD
drives in red even with 95% disk space remaining. It should only
The Physical Disks table shows
remaining disk threshold for SSD drives
96213
show red when there is 5% left. This issue was fixed with this
release.
in red (low disk space) even with 95%
of disk space remaining
After filtering the virtual volumes table using the advanced filter,
the summary row still shows the old values, and the total is incorrect
for the virtual volumes shown. This issue was fixed with this release.
Virtual Volumes table summary row
does not summarize correctly after using
the advanced filter
96528
When running in the Japanese locale, the virtual volume size is
increased by 0.250 GiB after users edit the virtual volume with no
HP 3PAR Management Console 4.4.1
in Japanese: Edit Virtual Volume
96878
change and click the Finish button. This only happens in Japanese
locale. This issue was fixed with this release.
inadvertently increases virtual size by
0.250 GiB
While connected to multiple StoreServs, after unchecking
Auto-Refresh and then re-checking it from the View/Auto-Refresh
HP 3PAR Management Console does
not reconnect to the StoreServ when
user selects Auto-Refresh
97229
menu item, the HP 3PAR Management Console freezes for a few
seconds. When it resumes, all the actions for the StoreServ are
disabled and users can proceed. This issue was fixed with this
release.
When editing a Remote Copy Group — for example, to change
the Periodic Sync Period — the display shows that the Synchronous
Synchronous copy set incorrectly when
editing a Remote Copy Group
99913
copy is incorrectly set to Periodic. This issue was fixed with this
release.
The HP 3PAR Management console displays incorrect data for the
cage subsystems drive cage Serial Number column on the hardware
inventory page. This issue was fixed with this release.
Incorrect Serial Number displayed
under cage subsystem hardware
inventory
100048
When users create a new remote copy group using the Peer
Persistent Provisioning Manager and right–click a virtual volume
HP 3PAR Management Console does
not properly set the backup volume
101312
on the Virtual Volumes table and select Create Remote CopyWWN to be the same as source volume
Group..., the HP 3PAR Management Console might not properlywhen creating a new remote copy
group in Peer Persistent configuration set the WWN backup volume to be the same as source volume.
This issue was fixed with this release.
The Virtual Volumes table does not refresh when switching from
vSphere Client Console (iLO Console) Desktop to Remote Desktop.
This issue was fixed with this release.
Virtual Volume tables do not refresh
correctly
101491
1.4 Known Issues with the HP 3PAR Management Console
1.4.1 When connected to the StoreServ and performing a rolling upgrade, the HP
3PAR Management Console fails (Issue 46452)
A fatal error occurs when a rolling upgrade is performed on the StoreServ.
4 1.3 Modifications to the HP 3PAR Management Console