HP 3PAR Management Console 4.5.0 Release Notes

1.2 Modifications to the Management Console
The following items have been addressed in this release.
DescriptionItemIssue ID
The Grown Copy Space column in Virtual Volumes table did not
adequately describe the displayed data, causing some confusion
Need better description/label for
Grown Copy Space column in Virtual
Volumes table
93871
in interpreting the data. The text Cumulative has been prepended
to Grown Admin Space, Grown User Space and Grown Copy Space
to indicate that these columns are an historical cumulative sum of
how much the virtual volume grew by each time it was grown.
The Physical Disks table shows remaining disk threshold for SSD
drives in red even with 95% remaining. It should only show red
when there is 5% left.
The Physical Disks table shows
remaining disk threshold for SSD drives
in red even with 95% remaining
96213
Workaround: None
After filtering the virtual volumes table using the advanced filter,
the summary row still shows the old values, and the total is incorrect
for the virtual volumes shown.
Virtual Volumes table's summary row
does not total correctly after using the
advanced filter
96528
Workaround: Go to another tab and come back.
When running in the Japanese locale, the virtual volume size is
increased by 0.250 GiB after you edit the virtual volume with no
HP 3PAR Management Console 4.4.1
in Japanese: Edit Virtual Volume
96878
change and click the Finish button. This only happens in Japanese
locale.
inadvertently increase the virtual size
by 0.250 GiB
Workaround: Run HP 3PAR Management Console in English locale.
While connected to multiple StoreServs, after unchecking
Auto-Refresh and then re-checking it from the View/Auto-Refresh
HP 3PAR Management Console does
not reconnect to the StoreServ when
user selects Auto-Refresh
97229
menu item, the HP 3PAR Management Console freezes up for a
few seconds. When it resumes, all the actions for the StoreServ are
disabled and you are unable to proceed.
Workaround: Disconnect and reconnect the StoreServ.
The HP 3PAR Management console displays incorrect data for the
cage subsystems drive cage Serial Number column on the hardware
inventory page.
Incorrect Serial Number is displayed
under cage subsystem hardware
inventory
100048
Workaround: None
1.3 Known Issues with the HP 3PAR Management Console
1.3.1 HP 3PAR Management Console fails when connected to the StoreServ during
rolling upgrade (Issue 46452)
A fatal error occurs when a rolling upgrade is performed on the StoreServ.
Workaround: When performing a rolling upgrade, it is recommended that all HP 3PAR Management
Console instances that are connected to that StoreServ be shut down.
1.3.2 Support for converting existing 1-1 to Synchronous Long Distance (SLD)
configuration (Issue 48421)
HP 3PAR Management Console does not currently support conversion of an existing remote copy 1-1
configuration to a SLD configuration. This will be addressed in a future release.
Workaround: Use the CLI to convert a 1-1 configuration to an SLD configuration.
4 1.2 Modifications to the Management Console