HP 3PAR InForm OS 3.1.1 GA/MU1/MU2/MU3 Release Notes

DescriptionItemIssue ID
class drives on the node which really does not have that
type of storage class configured.
Due to the last update time for cage data not being set,
frequently refreshing cage information would result in
Performance issue when refreshing all cage
data in IMC
74115
excessive SCSI commands being sent to the cage
potentially causing performance issues. This is resolved.
The FC driver fails to send LOGO onto the network as an
invalid destination ID (DID) is used. This is resolved.
The FC driver fails to send LOGO onto the
network as an invalid destination ID (DID) is
used.
74699
Due to an issue in InForm OS that parses metadata when
replicating a Read/Write snapshot (RWSS) with
Resolves an issue that can cause data
inconsistency issue when performing the
74732
thin-provisioned base volumes (TPVV), some valid datainitial copy of a Read/Write snapshot with
blocks may not be copied under certain circumstances.thin provisioned base volume for remote
copy and/or physical copy operations. This affects only the initial copy operation for both remote
copy and physical copy, but not the subsequent
resynchronization operations. This is resolved and it makes
sure that all valid data blocks of a read-write snapshot
with base TPVV are copied correctly.
The network driver has a greater lag time in HP 3PAR OS
version 3.1.2. This can cause online upgrade to fail
Online upgrades account for new network
driver.
74981
because the netc fails to startup correctly. Patches are
provided for 3.1.1 GA, 3.1.1 MU1, and 3.1.1 MU2 to
deal with the longer delay.
This is addressed in HP 3PAR OS version 3.1.1 MU3 by
having a longer built-in waiting period to the netc code
and thus eliminating the need for patch.
Customer can run physical copy in conjunction with
freespace or removesnap CLI commands without any
restrictions.
Physical copy now runs with freespace
and removesnap CLI commands.
75038
Sometimes, there is a failure while sending FLOGI.Long I/O pauses up to 428 seconds during
fabric remap test
75524
This is a remote copy issue for initial synchronization of
RWSS with TPVV. The TPVV is treated as a full-provisioned
Addresses an issue that causes RWSS with
TPVV base being treated as a
full-provisioned base volume (CPVV).
75776
base volume (CPVV), and this causes the whole volume
to be replicated to the remote side instead of only
replicating the allocated blocks for TPVV.
This is resolved.
A firmware issue causes running out of RP buffers which
could cause mailbox timeouts and results in automatic
1G iSCSI firmware could run out of RP
buffers and cause port resets.
75910
firmware core generation and port resets. This issue is
resolved by upgrading 1G iSCSI firmware to version
3.0.1.75.
If the DIF setting is wrong, the driver will correct the setting
through the auto-detect code when the 'overrun' bit is set
in the scsi command response.
FW Upgrade for drives QW903A,
QW905A, QR566A, and QR561A stopped
in V-Class.
76315
Reading or accessing the audit log is, itself, an audited
event. Hence, invoking showeventlog either implicitly or
explicitly now adds a getevenlog entry in the event log.
Record showeventlog requests.76459
New sw_cage_sled component supports C:M:D format
in PD alerts. Existing hw_cage_sled component reverted
to support Magazine: x format in HW cage alerts.
Changes made to hw_cage_sled and
sw_cage_sled components.
77304
When a host (Host-A) logs in with a new and different
FCID, the FC driver allocates resources to establish the
Fibre Channel (FC) driver issue.77440
connection. The resources for the old login are released
Modifications to the InForm OS 47