HP 3PAR InForm OS 3.1.1 Concepts Guide

Table 8 MIB-II Objects Supported by the SNMP Agent (continued)
AccessDescriptionObject Descriptor
Read-onlyName of the system. This helps to
identify the storage system. This name
cannot be set via SNMP.
sysName
Read/writeUser-defined system location. For
example: Building 1, room 4,
rack 3.
sysLocation
Exposed Objects
The 3PAR SNMP agent supports MIB-II system group objects. This section describes each of those
objects in detail.
System Description
Access: Read-only
MIB definition: sysDescr
Data type: Display string (max. 255 characters)
Default value: 3PAR InServ
Description: Identifies system model, system ID, serial number and InForm OS version of the master
node. For example, if the system has four nodes, the sysDescr may resemble the following:
3PAR InServT400, serial number 876541, InForm OS version x.x.x. This is only
a brief system description. Use the InForm OS CLI to obtain further details about the system and
each node. This is a read-only attribute.
System Object ID
Access: Read-only
MIB definition: sysObjectID
Data type: integer
Default value: 12925.1
Description: Identifies the unique product ID for the HP 3PAR Storage System. The first part of this
ID is the unique enterprise ID assigned to HP, Inc. by ICANN (12925). The second part of this ID
is the product ID assigned to the system (1). If there are future products other than the system, they
will be assigned incremental integers (2, 3, and so on). The manager uses this ID to identify products
manufactured by HP. This is a read-only attribute.
System Up Time
Access: Read-only
MIB definition: sysUpTime
Data type: time-tick (1/100 second)
Default value: 0
Description: Indicates how long the system has been operational, beginning with system initialization.
This is a read-only attribute.
System Contact Information
Access: Read/write
MIB definition: sysContact
Data type: Display string (max. 255 characters)
68 InForm OS SNMP Infrastructure