HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

Return PASS starting volume!!
NOTES
This test must be setup in two stages.
To run a test between system A and system B:
1. Start the server on system B, specifying the relevant <N:S:P>. For IP ports, only the IP address
of system A should be specified.
2. Start the client on system A, specifying the relevant <N:S:P>, the IP Address of system B and
the duration of the test in seconds. For FC Links, the <dest_addr> is also specified as an IP
address, the required IP address is displayed in the output of the startserver command.
70 Check Commands