HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

checkrclink
DESCRIPTION
The checkrclink command performs a latency and throughput test between two connected HP
3PAR Storage Systems.
SYNTAX
• checkrclink startclient <N:S:P> <dest_addr> <time>
• checkrclink stopclient <N:S:P>
• checkrclink startserver <N:S:P> \[<dest_addr>\]
• checkrclink stopserver <N:S:P>
AUTHORITY
• Super, Edit
• Any role granted the rclink_check right.
NOTE: You need access to all domains in order to run this command.
SUBCOMMANDS
startclient
Starts the link test.
stopclient
Stops the link test.
startserver
Start the server.
stopserver
Stops the server.
SPECIFIERS
<N:S:P>
Specifies the port on which to run the test.
<dest_addr>
Specifies the address of the remote site.
<time>
Specifies the test duration in seconds.
RESTRICTIONS
The Remote Copy ports must be configured via the controlport command before this test can
be carried out, however it is not required that the remote links be admitted into the RC target.
EXAMPLES
The following example displays a validity check of Virtual Volume test1:
cli% checkvv -n test1
Doing a consistency check only (no repairs)
checkrclink 69