HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

stoprcopy
DESCRIPTION
The stoprcopy command stops the Remote Copy service and optionally stops any started Remote
Copy volume groups.
NOTE: Remote Copy is not part of the Common Criteria evaluated configuration. See the HP
3PAR InForm OS Common Criteria Administrator’s Reference for more information before using
this command in Common Criteria mode.
AUTHORITY
• Super, Edit
• Any role granted the rcopy_stop right
NOTE: You need access to all domains in order to run this command.
SYNTAX
stoprcopy [options]
OPTIONS
–f
Specifies that any started copy will not ask for confirmation for the -clear option.
–stopgroups
Specifies that any started Remote Copy volume groups are stopped.
–clear
Specifies that configuration entries affiliated with the stopped mode are deleted.
CAUTION: Issuing the stoprcopy -clear command completely removes the Remote Copy
setup and is NOT reversible.
SPECIFIERS
None.
RESTRICTIONS
If the –stopgroups option is not used, all groups must already be stopped.
EXAMPLES
The following example disables the Remote Copy functionality of all primary Remote Copy volume
groups:
cli% stoprcopy –stopgroups
stoprcopy 581