HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

startrcopygroup
DESCRIPTION
The startrcopygroup command enables Remote Copy for the specified Remote Copy volume
group.
NOTE: Remote Copy is not part of the Common Criteria evaluated configuration. See the HP
3PAR InForm OS Common Criteria Administrator’s Reference for more information before using
this command in Common Criteria mode.
SYNTAX
startrcopygroup [options] <group_name> | <pattern>...
AUTHORITY
• Super, Edit
• Any role granted the rcopygroup_start right.
OPTIONS
–nosync
Prevents the initial synchronization and sets the virtual volumes to a synchronized state.
–wait
Specifies that the command waits until the initial synchronization is completed. The system generates
an event when the synchronization is completed.
-t <target_name>
Only start the group on the specified target.
-pat
Specifies that specified patterns are treated as glob-style patterns and that all Remote Copy groups
matching the specified pattern will be started. This option must be used if the pattern specifier is
used.
SPECIFIERS
<group_name>
The name of the Remote Copy volume group. The group name can be obtained using the
showrcopy command.
<pattern>
Specifies a glob-style pattern (see help on sub,globpat). This specifier can be repeated to start
multiple groups.
RESTRICTIONS
This command requires the 3PAR Remote Copy license. Contact your local service provider for
more information.
EXAMPLES
The following example starts Remote Copy for Group1:
cli% startrcopygroup Group1
startrcopygroup 531