HP 3PAR InForm OS 3.1.1 Command Line Interface Reference

InServ1_in to the corresponding secondary volume group that was previously created when
the creatercopygroup command was issued:
cli% admitrcopyvv vv1 Group1 InServ2:vv1_remote
In the following example, the admitrcopyvv command adds all volumes beginning with tpvv to
the primary volume group Group1. At the same time, it adds the secondary volumes, which are
named the same as the primary virtual volumes (as specified by @vvname@), on the target system
InServ2 to the corresponding secondary volume group (Group1.r<sys_ID>).
cli% admitrcopyvv -pat tpvv* Group1 InServ2:@vvname@
NOTES
A secondary volume mapping must be provided for each target in the group.
The virtual volume and the Remote Copy group must be in the same domain or both in no
domain.
52 Admit Commands